SCS Static Shielding & Conductive Bags

Q Source V12-3- Standard Action Male & Female Snap Kit - 100/Pack

The Q Source V12-3 Standard Action Male & Female Snap Kit is complete with 100 male 0.25" standard post and 100 female "standard action" studs. These snaps are used to ground matting.

(read more...)
Regular Price: $15.00
Q Price: $11.15
Q Source V12-7 - Standard Male & Female Snap Kit - 100/Pack

The Q Source V12-7 Standard Male & Female Snap Kit is complete with 100 male 0.25" standard post and 100 female standard studs. These snaps are used to ground matting.

(read more...)
Regular Price: $15.00
Q Price: $11.15
SCS (3M) 2389 - Table Mat Interconnect Cord - 10' - 10 mm Snap

The SCS (formerly known as 3M Static Control) 2389 Table Mat Interconnect Cord is used to interconnect two monitored worksurfaces. It's a straight cord with male snap fastners at each end and no resistors.

(read more...)
Regular Price: $18.88
While Supplies Last: $15.61
SCS 3033 - Snap Fastener for 1800/8800 Series Mats/Runners - Male 0.125" Hole - 10mm Diameter

The SCS 3033 Snap Fastener is a male snap for 1800/8800 Series Mats & Runners.

Please Note: These 10-packs must be ordered in multiples of 10. An order of 10 packs equals 100 Snap Fasteners, 20 equals 200, etc.

(read more...)
Regular Price: $13.38
Q Price: $12.08
SCS 3048 - Grounding System - 15' - 10 mm Snap

The SCS 3048 Grounding System will ground two single conductor wirst straps. This system comes completed with a ring connector and a cord which has a one megohm resistor for mat connection only.

(read more...)
$24.65
SCS 3051 - Ground Cord w/Center Snap for Standard Field Service Kit

The SCS 3051 Ground Cord w/Center Snap for Standard Field Service Kit has a wrist strap cord and ground cord with a one megohm resistor.

(read more...)
Regular Price: $50.40
Q Price: $45.50
SCS 770040 - MagSnap 360 Parking Station

The SCS 770040 MagSnap 360 Parking Station has an adhesive backing that mounts to any surface near the operator providing a storage terminal for their wrist strap when not in use. It provides a longer life span by sparing the operator jacks from the mechanical wear and tear of constant insertion and removal of the wrist cord. The SCS 770040 MagSnap 360 Parking Station will display a PASS condition on the monitor when the wrist cord is parked. This parking station is made in the USA.

(read more...)
Regular Price: $14.95
Q Price: $13.50
SCS SNAPSOCKET3/8 - Rivet Snap Socket - 0.375" Female Snap & Eyelet - 10mm - 10/Pack

The SCS SNAPSOCKET3/8 Rivet Snap Socket 0.375" Female Snap & Eyelet is used to connect a ground cord to a static mat. These stud snaps are attached to a mat by using the SCS (3M) SNAPTOOL. 10 sockets and eyelets are included in each pack

(read more...)
$3.87
Transforming Technologies CS0125 - Ring Terminal Banana Jack - 10/Bag

The Transforming Technologies CS0125 Ring Terminal Banana Jack is compatible with standard banana jacks and made from a copper with chrome material.

(read more...)
Regular Price: $12.31
Q Price: $11.08
Transforming Technologies CS1090 - Universal Snap Kit

The Transforming Technologies CS1090 Universal Snap Kit includes a 10 mm stud, 10 mm socket, threaded backing washer, conical nut, long screw, short screw, and ESD common point ground label. Everything needed to field-install a stud or socket on all soft materials up to 0.375" thick. Screws are 6-32 Flat Head Phillips machine screws; one 0.25" long and one 0.375" long. Punch a hole through the mat and screw on the socket or stud, whichever is preferred. All that is needed is a Phillips screwdriver.

(read more...)
Regular Price: $14.62
Q Price: $13.15
Transforming Technologies FM1517 - Low-Profile Floor Mat Ground Cord - 10 mm Female Snap

The Transforming Technologies FM1517 Low Profile Floor Mat Ground offers the common ground point required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20. The FM1500 Series comes with a molded, low-profile mushroom cap and a 0.375" (10 mm) snap ensures secure connection to floor mats. #10 ring terminal for connection to ground.

Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1

(read more...)
Regular Price: $5.62
Q Price: $5.05
Transforming Technologies GL4501 - GL4500 Series Uncoated ESD Inspection Gloves - X-Small - 8" - 12/Pack

The Transforming Technologies GL4501 GL4500 Series Uncoated ESD Inspection Gloves are designed to be worn when handling ESD susceptible items and are made from a static dissipative nylon that reduces charge generation. These ESD-safe uncoated gloves allow for maximum breathability and have seamless fine gauge knit and finished rolled cuff for user comfort. The Transforming Technologies GL4501 GL4500 Series Uncoated ESD Inspection Gloves can be laundered for repeated use.

(read more...)
Regular Price: $27.00
Q Price: $24.30
Transforming Technologies GL4501P - GL4500 Series Palm Coated ESD Inspection Gloves - X-Small - 8" - 12/Pack

The Transforming Technologies GL4501P GL4500 Series Palm Coated ESD Inspection Gloves are designed to be worn when handling ESD susceptible items and are made from a static dissipative nylon that reduces charge generation. These ESD-safe coated gloves have polyurethane coating that allows for an excellent grip and increased breathability. They also have a seamless fine gauge knit, finished rolled cuff, and uncoated back for user comfort and breathability. The Transforming Technologies GL4501P GL4500 Series Palm Coated ESD Inspection Gloves can be laundered for repeated use.

(read more...)
Regular Price: $33.00
Q Price: $29.70
Transforming Technologies GL4501T - GL4500 Series Fingertip Coated ESD Inspection Gloves - X-Small - 8" - 12/Pack

The Transforming Technologies GL4501T GL4500 Series Fingertip Coated ESD Inspection Gloves are designed to be worn when handling ESD susceptible items and are made from a static dissipative nylon that reduces charge generation. These ESD-safe fingertip coated gloves have polyurethane coating that allows for a high level of tactile sensitivity and increased breathability. They also have a seamless fine gauge knit and finished rolled cuff for user comfort. The Transforming Technologies GL4501T GL4500 Series Fingertip Coated ESD Inspection Gloves can be laundered for repeated use.

(read more...)
Regular Price: $30.00
Q Price: $27.00
Transforming Technologies GL4502 - GL4500 Series Uncoated ESD Inspection Gloves - Small - 8" - 12/Pack

The Transforming Technologies GL4502 GL4500 Series Uncoated ESD Inspection Gloves are designed to be worn when handling ESD susceptible items and are made from a static dissipative nylon that reduces charge generation. These ESD-safe uncoated gloves allow for maximum breathability and have seamless fine gauge knit and finished rolled cuff for user comfort. The Transforming Technologies GL4502 GL4500 Series Uncoated ESD Inspection Gloves can be laundered for repeated use.

(read more...)
Regular Price: $27.00
Q Price: $24.30
Transforming Technologies GL4502P - GL4500 Series Palm Coated ESD Inspection Gloves - Small - 8" - 12/Pack

The Transforming Technologies GL4502P GL4500 Series Palm Coated ESD Inspection Gloves are designed to be worn when handling ESD susceptible items and are made from a static dissipative nylon that reduces charge generation. These ESD-safe coated gloves have polyurethane coating that allows for an excellent grip and increased breathability. They also have a seamless fine gauge knit, finished rolled cuff, and uncoated back for user comfort and breathability. The Transforming Technologies GL4502P GL4500 Series Palm Coated ESD Inspection Gloves can be laundered for repeated use.

(read more...)
Regular Price: $33.00
Q Price: $29.70
Transforming Technologies GL4502T - GL4500 Series Fingertip Coated ESD Inspection Gloves - Small - 8" - 12/Pack

The Transforming Technologies GL4502T GL4500 Series Fingertip Coated ESD Inspection Gloves are designed to be worn when handling ESD susceptible items and are made from a static dissipative nylon that reduces charge generation. These ESD-safe fingertip coated gloves have polyurethane coating that allows for a high level of tactile sensitivity and increased breathability. They also have a seamless fine gauge knit and finished rolled cuff for user comfort. The Transforming Technologies GL4502T GL4500 Series Fingertip Coated ESD Inspection Gloves can be laundered for repeated use.

(read more...)
Regular Price: $30.00
Q Price: $27.00
Transforming Technologies GL4503 - GL4500 Series Uncoated ESD Inspection Gloves - Medium - 8" - 12/Pack

The Transforming Technologies GL4503 GL4500 Series Uncoated ESD Inspection Gloves are designed to be worn when handling ESD susceptible items and are made from a static dissipative nylon that reduces charge generation. These ESD-safe uncoated gloves allow for maximum breathability and have seamless fine gauge knit and finished rolled cuff for user comfort. The Transforming Technologies GL4503 GL4500 Series Uncoated ESD Inspection Gloves can be laundered for repeated use.

(read more...)
Regular Price: $27.00
Q Price: $24.30
Transforming Technologies GL4503P - GL4500 Series Palm Coated ESD Inspection Gloves - Medium - 8" - 12/Pack

The Transforming Technologies GL4503P GL4500 Series Palm Coated ESD Inspection Gloves are designed to be worn when handling ESD susceptible items and are made from a static dissipative nylon that reduces charge generation. These ESD-safe coated gloves have polyurethane coating that allows for an excellent grip and increased breathability. They also have a seamless fine gauge knit, finished rolled cuff, and uncoated back for user comfort and breathability. The Transforming Technologies GL4503P GL4500 Series Palm Coated ESD Inspection Gloves can be laundered for repeated use.

(read more...)
Regular Price: $33.00
Q Price: $29.70
Transforming Technologies GL4503T - GL4500 Series Fingertip Coated ESD Inspection Gloves - Medium - 8" - 12/Pack

The Transforming Technologies GL4503T GL4500 Series Fingertip Coated ESD Inspection Gloves are designed to be worn when handling ESD susceptible items and are made from a static dissipative nylon that reduces charge generation. These ESD-safe fingertip coated gloves have polyurethane coating that allows for a high level of tactile sensitivity and increased breathability. They also have a seamless fine gauge knit and finished rolled cuff for user comfort. The Transforming Technologies GL4503T GL4500 Series Fingertip Coated ESD Inspection Gloves can be laundered for repeated use.

(read more...)
Regular Price: $30.00
Q Price: $27.00
© 2000-2017 Q Source, Inc. All rights reserved. | 800-966-6020 | 631-563-0600