SCS 770151 SW Aware Single-Workstation Continuous ESD Monitor - North America Power Adapter - 3.61" x 0.86" x 0.80" (92 x 22 x 20 mm) - Black

The SCS 770151 Single-Workstation ESD Monitor North American Adapter continuously monitors the path-to-ground integrity of one operator and one ESD worksurface, eliminating the need for daily wrist strap testing and record keeping.

The SW Aware Monitor uses vector impedance technology by applying a continuous test voltage of 1.2 volts peak-to-peak at 1 to 2 microamperes to the wrist strap. The test voltage creates a square wave that the monitor circuit compares to established patterns. Impedance Monitoring Technology (IMT) determines if the monitored circuit is complete and the total equivalent DC resistance is within specifications, producing very fast alarm times and minimal false alarms. The operator test range is 500 kilohms to 10 megohms impedance, and the worksurface test limit is 10 megohms (±20%). Test limits are factory configured and cannot be modified. Annual calibration is recommended; use the SCS 770153 Verification Tester for periodic verification every 6 to 12 months without removing the monitor from the factory floor.

Benefits & Features of the SW Aware Single-Workstation Continuous ESD Monitor - North America Power Adapter - 3.61" x 0.86" x 0.80" (92 x 22 x 20 mm) - Black - EA:

• Continuously Monitors One Operator and One ESD Worksurface Path-to-Ground
• Impedance Monitoring Technology (imt) for Reliable Single-Wire Wrist Strap Monitoring
• Audio and Visual Alarms Activate in Less than 50 Milliseconds
• Monitors Worksurface Path-to-Ground of Less than 10 Megohms
• Operator LED Indicates Grounding Status - Green (pass), Red (fail), Blue (parked)
• Worksurface LED Indicates Mat Path-to-Ground Status - Green (pass), Red (fail)
• Monitors Worksurface Path-to-Ground of Less than 10 Megohms
• Ethernet Port for SCS Static Management Program (smp) Network Integration
• Set Switch Toggles Audible Alarm Volume and Enables or Disables Worksurface Monitor Circuit
• Mounting Holes for Under-Tabletop Installation
• Calibrated to NIST Standards
• Made in the United States of America

---

---

SW Aware Single-Workstation Continuous ESD Monitor - North America Power Adapter - 3.61" x 0.86" x 0.80" (92 x 22 x 20 mm)