About the HXD1-302-02 Compact Heated Drying Cabinet

The moisture-proof cabinets provide low humidity, temperature controlled baking combined with ultra-low dehumidification technology and medium- and low-temperature baking to to fully meet the environmental requirements of 60°C and less than 5% RH. These units are designed for MSD storage, especially for printed circuit board packaging. SMD devices can be stored in low humidity and baked at low humidity and low temperature before packaging, which greatly improves yield.

The shells are made of imported engineering plastics. There is a temperature resistance of more than 300° with a designed service life of 30+ years. The moisture-proof box has motor drive, heat insulation, magnetic isolation, electrostatic discharge and is both dustproof and anti-theft.

Maintenance Free Design Heated Drying Cabinet:
The heated drying cabinet works with drying units. An interlocking fan circulates air through the drying unit, while the zeolite desiccant absorbs moisture. During periodic regenerating of the zeolite desiccant by heating, the absorbed humidity and exhaust is evaporated through the external shutters of the drying unit. The process requires no extra maintenance.

Heated Dry Cabinet with ESD Safe Design:
The heated drying cabinet has an ESD metal painted steel body, stainless steel shelves and ground wire, complying with IEC 61340-5-1.

XDry’s most compact heated dry cabinet is ideal for applications where requirements demand a heated ultra-low humidity storage solution. The HXD1-302-02 is small and portable enough to be located on the production floor or in your lab, providing the perfect storage environment virtually anywhere that it is required. Configured with two doors and a high-quality industrial dryer, this compact cabinet offers excellent performance while promising a 2% RH environment that can be maintained up to 60°C for years at a time.

Ideal for moisture sensitive SMD packages, these units comply with IPC/JEDEC J-STD-033D. The HXD1-302-02 heated drying cabinet is excellent at drying moisture sensitive components and printed circuit boards.

HXD1-302-02 Specifications
Dry Cabinet Measurements
  • External dimension (WDH): 23.62" x 29.45" x 49.80" /
    600 x 748 x 1265 mm
  • Inner size (WDH): 18.23" x 16.93" x 26.39" / 463 x 430 x 670 mm
  • Effective capacity: 280L / 73.97 Gal
  • Ambient temperature to 40C / 104 F
  • Dehumidification range: 2%-50% RH
  • Dehumidification volume: 339 L /89.55 Gal
  • Box weight: 115 kg / 253.53 LBS
  • Laminate load: 100 kg /220.46 LBS
  • Steel plate laminate: 3 pcs